Categories
Brands
EnGenius ECB600 is a wireless-11n 600Mbps (300Mbps + 300Mbps) Dual Band concurrent Access Point/ Client Bridge
Please sign in so that we can notify you about a reply
Description
With the dual band Wireless N600 ECB600 companies can now offer employees, guests, staff or students more expanded options for users who transfer large files within the network or use other bandwidth intensive applications like streaming HD video. The AP’s Gigabit Ethernet (10/100/1000) port also offers greater bandwidth capacity and faster data transfers through the network. This high-powered Access Point/Bridge with its enhanced receive sensitivity and internal MIMO (Multiple In/Multiple Out) antenna array extends wireless coverage and enhances connectivity to client devices even in areas where connections have been previously challenging or non-existent and in some buildings it’s wireless signal can penetrate up to 3 floors. This makes the ECB600 ideal for extending networks within large or multi-story buildings or expansive, client-intensive facilities like hotels, resorts, hospitals, office buildings, universities or other multi-building campus facilities.
The ECB600 can be configured to operate in several different modes – as a dual band Wireless-N Access Point, a WDS Access Point, or Repeater. It operates concurrently in the 2.4GHz and 5GHz frequency spectrums supporting 802.11a/b/g/n standards. ECB600 also includes EZ Controller, access point monitoring and management software that provides a robust suite of tools for IT managers, installers and network administrators to monitor the performance of their deployed EnGenius access points and bridges, update them with new firmware or reconfigure the operation mode that they are in from one central location.
| Technical Specification | |
| Hardware RF: 2.4 and 5 GHz Frequency Bands Standard: IEEE 802.11a/b/g/n Radio I: 11b/g/n: 2.412~2.484 GHz Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz Data Rate: Up to 300 Mbps in both frequency bands Memory: 64MB Flash Memory: 8MB Antenna Four (4) External 5 dBi Omni-Directional Antennas Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) 1 x Reset Button Power Jack Power Requirements Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries) Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af) Power Adapter (United States) 48VDC/0.375A Device: 12V/2A Modulations OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK Operating Channels 2.4 GHz: US/Canada 1-11 5 GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
| |
| Receiver Sensitivity | |
| 802.11n (5 GHz) -94dBm @ MCS0 -76dBm @ MCS7 -91dBm @ MCS8 -73dBm @ MCS15
802.11n (2.4 GHz) -95dBm @ MCS0 -77dBm @ MCS7 -91dBm @ MCS8 -75dBm @ MCS15
| 802.11a (5 GHz) -95dBm @ 6Mbps -80dBm @ 54Mbps
802.11b (2.4 GHz) -95dBm @ 1Mbps -91dBm @ 11Mbps |
| Available Transmit Power (Max. Power may be different depending on local regulations) | |
| 802.11n (5 GHz) 802.11n (2.4 GHz) 27dBm @ MCS0~2/MCS8~10 27dBm @ MCS0~2/MCS8~10 26dBm @ MCS3/MCS11 27dBm @ MCS3/MCS11 25dBm @ MCS4/MCS12 26dBm @ MCS4/MCS12 23dBm @ MCS5/MCS13 25dBm @ MCS5/MCS13 22dBm @ MCS6/MCS14 24dBm @ MCS6/MCS14 21dBm @ MCS7/MCS15 23dBm @ MCS7/MCS15
802.11a (5 GHz) 802.11b (2.4 GHz) 26dBm @ 6~24Mbps 7dBm @ 1~11Mbps 25dBm @ 36Mbps 23dBm @ 48Mbps 21dBm @ 54Mbps | |
| Software |
| Topology Infrastructure/Ad-Hoc Operation Modes Access Point, WDS Bridge, WDS Access Point, Universal Repeater Multiple BSSID Supports up to 8 BSSIDs per radio LAN IP (check validity and DHCP server IP range) MAC SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging Spanning Tree Supports 802.1d Spanning Tree Protocol Wireless Wireless Mode: 11a/11b/11g/11n Channel selection (settings vary by country) Channel bandwidth (Auto, 20 MHz, 40 MHz) Transmission rate: 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only 5 GHz: 11n only, 11a/n mix, 11a only QoS WMM (Wireless Multimedia) VPN Pass-through (PPTP, L2TP, IPSec) WPS Software only |
| Management |
| Tx Power Control Adjust transmit power by dBm Configuration Web-based configuration (http)/Telnet Telnet Server CLI Firmware Upgrade Via web browser, settings are reserved after upgrade Administrator Setting Administrator Username and Password Change Reset Setting Reboot (press 1 second). Reset to factory default (press 10 seconds) System Monitoring Status Statistic and Event Log SNMP V1, V2c, V3 MIB MIB I, MIB II (RFC1213) and private MIB Traffic Shaping Incoming and outgoing wireless traffic shaping Auto-channel Selection Automatically selecting least congested channel Bandwidth Measurement IP range and bandwidth management Auto Reboot Reboot Access Point by minute, hour, day, or week Backup and Restore Save and restore settings through Web interface CLI Supports Command Line Interface Diagnosis IP pinging statistics Log SysLog and Local Log support LED Control On/Off AP Detection Scanning for available EnGenius APs Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC Address Filtering, Up to 50 field L2 Isolation (Access Point mode) Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) |
No reviews found
