TI-PG62B-6-Port Industrial Gigabit PoE+ DIN-Rail Switch 12 – 56 V

 
TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.
 
 
 

PoE Power A 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.	Fault Tolerance  Features dual redundant 12 – 56 VDC power inputs with output alarm relay.	Industrial Hardened Design Equipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F).

	Network Ports  4 x Gigabit PoE+ ports and 2 x dedicated SFP slots
	DIN-Rail / Wall Mounts  IP30 rated metal enclosure with included DIN-rail and wall mount hardware
	Switching Capacity  12 Gbps switching capacity
	Redundant Power  Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)
	Alarm Relay  Alarm relay triggered by power failure of primary and/or redundant power
	Jumbo Frame  Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance
	Extreme Temperatures  Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)
	Shock and Vibration Resistant  Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)
	Grounding Point  Grounding point protects equipment from external electrical surges

• Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3z
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
• Device Interface
• 4 x Gigabit PoE+ ports
• 2 x 100/1000 Mbps SFP slots
• 6-pin removable terminal block
• LED indicators
• DIP switch
• DIN-Rail mount
• Wall mount
• Grounding point
• Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
• Gigabit: 2000 Mbps (full duplex)
• Performance
• Data RAM Buffer: 1024 KB
• Switching Fabric: 12 Gbps
• MAC Address Table: 1 K entries
• Jumbo Frame: 9 KB
• Forwarding rate: 8.9 Mpps (64-byte packet size)
• Special Features
• Hardened components rated for extreme temperatures
• Supports 12/24/48 power inputs
• Voltage booster boost up to 55V DC
• Dual redundant power inputs
• Auto-Negotiation
• Auto store and forward architecture
• Automatic address learning and address aging
• ESD 6KV support
• DC Power
• Input: 12/24/48 V DC
• Output: up to 55 V DC
• Compatible power supply: TI-S12048 (sold separately)
• Consumption: Max. 5.76 Watts (no PoE)
• PoE
• PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC
• PoE budget: 60 W @ 12 VDC
• Terminal Block
• Redundant power inputs, alarm relay contact, 6 pin
• Wire range: 0.34 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
• Wire strip length: 7-8 mm
• DIP Switch
• 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
• 2: OFF (SFP 1000 M, default), ON (SFP 100 M)
• Alarm Relay Contact
• Relay outputs with current carrying capacity of 1A, 24V DC
• Open circuit mode when one power source is connected
• Short circuit mode when two power sources are connected
• MTBF
• 510,304 hours
• Housing
• IP30 metal case
• DIN-rail mount
• Wall mount
• Grounding point
• 6 KV ESD protection
• Operating Temperature
• - 40 to 75 °C (-40 to 167 °F)
• Operating Humidity
• Max. 95 % non-condensing
• Dimensions
• 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
• Weight
• 700 g (1.6 lb)
• Certifications
• CE
• FCC
• Shock (EN 60068-2-27)
• Freefall (EN 60068-2-32)
• Vibration (EN 60068-2-6)

Package Contents

• TI-PG62B
• Quick Installation Guide
• Removable terminal block
• DIN-rail and wall mount kit