EnTurbo 11ac Wave 2 Indoor wireless Access Point AC1300

Technical Specifications

Standards IEEE 802.11b/g/n on 2.4 GHz IEEE 802.11a/n/ac on 5 GHz

Processor Qualcomm® 717 MHz Quad-Core CPU 4x ARM Cortex A7

Antenna 1 x 2.4 GHz: 5 dBi 1 x 5 GHz: 5 dBi Integrated Omni-Directional Antenna

Physical Interface 1 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port 1x DC Jack 1 x Reset Button

LED Indicators 1 x Power 1 x LAN 1 x 2.4 GHz 1 x 5 GHz

Power Source Power-over-Ethernet: 802.3af Input IEEE 802.11e Compliant Source 12VDC /1A Power Adapter

Maximum Power Consumption 9W

Surge Protection 0.5KV

Wireless & Radio Specifications

Operating Frequency Dual-Radio Concurrent 2.4 GHz & 5 GHz

Operation Modes Access Point Mode WDS: WDS AP, WDS Bridge

Frequency Radio 2.4 GHz: 2400 MHz ~ 2472 MHz 5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz

Transmit Power Up to 23 dBm on 2.4 GHz Up to 23 dBm on 5 GHz

Tx Beamforming (TxBF)

Radio Chains/Spatial Stream 2×2:2

SU-MIMO 2.4GHz – Two (2) Spatial Stream SU-MIMO up to 400 Mbps to individual 2×2 VHT40 client devices (300 Mbps for HT40 802.11n client devices) 5GHz – Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2×2 VHT40 client devices

MU-MIMO 5GHz – Two (2) Spatial Stream Multi User (MU) MIMO for up to 867Mbps to two (2) MU-MIMO capable wireless devices simultaneously

Supported Data Rates (Mbps): 2.4 GHz: Max 400 5 GHz: Max 867 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15) 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)

Supported Radio Technologies 802.11b: Direct-Sequence Spread Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11n/ac: 2×2 MIMO with 2 Streams

Channelization 802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz 802.11n Supports High Throughput (HT)—HT 20/40 MHz 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio—VHT 40 MHz (256-QAM) 802.11n/ac Packet Aggregation: AMPDU, ASPDU

Supported Modulation 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Management

Multiple BSSID Supports 16 SSIDs (8 SSIDs per Band)

VLAN Tagging Supports 802.1q SSID-to-VLAN Tagging Cross-Band VLAN Pass-Through Management VLAN

Spanning Tree Supports 802.1d Spanning Tree Protocol

QoS (Quality of Service) Complaint With IEEE 802.11e Standard WMM

SNMP v1, v2c, v3

MIB I/II, Private MIB

Product Highlights

EAP1300 Access Points turbocharge wireless performance 

for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, and performance, offering greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.

• Quad-Core Processor, 717 MHz “Turbo Engine”
• 11ac Wave 2 Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
• Up to 30% Faster Throughput Over 11ac Wave 1 3×3 APs
• GigE 802.3af PoE-Compliant for Easy Placement Where Power is Limited
• Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients