On-site deployment support up to 100 Devices (AP+Switch)2*10/100/1000 Mbps Ethernet ports
Product Highlight
The SkyKey 1 can be applied to manage EnGenius Wireless Access Points and switches from both remote and local sites intuitively and easily. The solution is also supported power by either 802.3af/at PoE (Power Over Ethernet) or DC12V power.
· Built-in Qualcomm Quad-core CPU with sup-porting powerful computing for driving and boosting performance effectively.
· Compliance with 802.3af/at or DC12V Input power source
· 2 x 10/100/1000 Mbps Ethernet ports that use to network with switches or servers easily.
· Expanding Micro SD slot for backing up configuration of this SkyKey.
· Built-in management software to organize a systemic and distributed managerial system for controlling 100 sets of EnGenius Access Points directly.
· Built-in 1GB DRAM and 4GB eMMC flash storage to control and manage statistical information up to 7 days
Technical Specifications
Hardware Specification
CPU:
Model: Qualcomm IPQ4019 Architecture: 32-bit Clock Rate: ARM A7 Quad Core 717MHz Hardware Encryption Acceleration: Yes
Memory:
System Memory: 1GB DDR3
Storage:
eMMC: 4GB (MLC)
Interfaces and LEDs
2 x 10/100/1000 Mbps RJ45 ports (1 x PoE) 1 x Micro SD Slot 1 x DC-Input Jack 1 x Reset Button 1 x Power LED (Orange) 2 x LAN LED (Green)
Management Features
Controlling capability
Managing Qty of Access Points
Maximum 100 pcs of EnGenius Access Points
Reserving duration of managerial data
Maximum 30 days if users control and manage 100pcs of Access Points on a SkyKey solution. Each Access Point has networked with 40 client devices simultaneously.
Dashboard
Managed Access Points / Switches
Users can realize the status of Access Points and Switches
System Resource Usage
CPU: Usage (%) of CPU for this SkyKey Memory: Usage (%) of Memory for this SkyKey Disk: Usage (%) of Disk for this SkyKey
System Overview
Users can realize ezMaster software version on this SkyKey
Recent Projects
Updated or revised projects are listed in the right sidebar.
Monitoring
Rogue AP Detection
Enable the function to detect the fake access points in the environment.
Active Clients
The page will show clients’ information including client name, getting IP, MAC address, Client OS*, SSID, Band, Tx, Rx, and RSSI information.
Statistics Information Access Point
Top ten traffic for the Managed AP. We can reserve data for up to 30 days.
Wireless Client Information
Top Fifty (50) traffic for wireless client devices.
Visualization
Topology View
The topology view could assist users to realize the status of your network and then find abnormal devices for troubleshooting easily.
Map View
Enter this view to find locations of Access Points or switches on the global view of google map. You may also filter one of APs from google map easily.
Floor Plan View
Upload a floor plan for this project. Users can put a known floor plan and then place Access Points or switches on this view.
Mesh View
Mesh view also can realize the overall topology for the mesh.
Hotspot Service
The Captive Portal profile setting will be set a profile to apply on one of SSIDs. Users can configure authentication types, session of connecting clients, redirect page types and redirect behavior
System Overview
Users can realize ezMaster software version on this SkyKey
Recent Projects
Updated or revised projects are listed in the right sidebar.
Maintenance
Bulk Update
Throughout this function to proceed mass upgrade procedure on a specific AP.
Bulk Update (Switch)
Throughout this function to proceed mass upgrade procedure on a specific switch.
AP Remote Log
Synchronize clients’ information of AP to a remote log server.
Environmental & Physical
Operating:
Temperature: 0°C~40°C (32°F~104°F) Humidity: 0%~90% typical
Storage:
Temperature: -40°C~80°C (-40°F~176°F) Humidity: 0%~90% typical
Dimensions & Weight
Dimension
100x59x23mm
Weight (Without Accessories)
79g
No reviews found